16-Oz Type P7™ Aerosol (net wt 10 oz)
Design & Construction
- Properties: Flash Point (ASTM D93) 38°C/100°F, Initial Boiling Point 118°C/245°F, Specific Gravity 0.69, Dielectric Strength (ASTM D877) 13 kV, USDA Approved.
- Compatibility: P7 Multipurpose Oil is compatible with most plastics and elastomers. Testing is based on a soak test described in ASTM D 543. P7 Oil will temporarily affect some rubber compounds, but they should return to their original state after the solvent carrier has dried. It is recommended that all plastic parts, gaskets, seals, and O-rings be tested for specific use and exposure method.
- Water Displacement: P7 Multipurpose Oil displaces moisture and dries out ignitions. It creeps under water and ice, dissolving and carrying away these contaminants. A non-conductive, protective film is left behind. P7 Oil displaces water according to the procedure described in Mil-Spec C-16173E. No rusting or mottling was observed on the treated surface.